How Do You Replace A Single Handle Kitchen Faucet??

Suggested clip 120 seconds

How to Replace a Kitchen Faucet With a Single Handle | The Home


Start of suggested clip

End of suggested clip

How do you take apart a single handle kitchen faucet?



Suggested clip 120 seconds

How to Fix A Dripping or Leaky Single Handle Faucet – YouTube


Start of suggested clip

End of suggested clip

How do you install a kitchen faucet pull down?



Suggested clip 108 seconds

Installing a Pullout Kitchen Faucet | Moen Guided Installations


Start of suggested clip

End of suggested clip

Can you replace a double handle faucet with a single handle faucet?

Thankfully, replacing a single handled-faucet with a double-handled faucet or vice versa is not too difficult—especially for an experienced plumber. Almost all modern bathroom sinks come standard with three holes for faucet installation.

How do I install a new kitchen faucet?

Install the New Faucet

  • Place the rubber or plastic gasket, or trim ring, over the faucet holes in the sink and set the deck plate.
  • Feed faucet lines into the hole(s).
  • Install washers and nuts underneath the sink.
  • For pull-down faucets, attach the quick-connect hose to the supply pipe.
  • Connect water supply lines.

How do you replace a Moen single handle kitchen faucet?

How to Fix a Moen Single Handle Kitchen Faucet

  1. Turn the water supply pipes in a clockwise direction to turn the water off.
  2. Remove the handle.
  3. Remove the cam nut and the spout to access the ball assembly.
  4. Lift the circular plastic cam off of the faucet assembly, followed by the metal ball.
  5. Press each replacement valve spring onto its replacement valve seat.

How do you lubricate a single handle faucet?

How to Lubricate Single-Handle Faucets

  • Turn off the water supply to the faucet by turning the shut offs under the sink all the way to the right.
  • Loosen the Allen screw located at the base of the faucet handle and pull off the handle.
  • Remove the washer that is directly under the handle.
  • Remove the retaining clip that holds in the cartridge.

How do you remove a Moen single handle kitchen faucet?

How to Disassemble a Moen Kitchen Faucet

  1. Locate the setscrew in the handle.
  2. Pry off the cap on top of the handle with a screwdriver to expose the screw, if necessary.
  3. Unscrew the set screw in the handle.
  4. Lift off the handle, exposing a round stainless cartridge collar with an indent that points up.
  5. Remove this cartridge collar by pulling up on it manually.

Why is my kitchen faucet dripping?

Slow water flow can be caused by plugged holes in the faucet body. Before you replace worn parts and reassemble the faucet, hold a rag over the dripping faucet and open the water shutoff valve slightly to flush out debris that may have been loosened during the cleaning and inspection.

Photo in the article by “Flickr”