Depending on the materials used, features added, and the finish, banquette seating can cost anywhere from $1,500-$8,000 or more.
This can be significantly more than buying a banquette furniture set or traditional table and chairs.
Banquette seating for kitchen, breakfast nook, or dining room.
How do you build a banquette bench with storage?
- Step 1: Measure space and plan your banquette bench.
- Step 2: Remove baseboards.
- Step 3: Build interior framing.
- Step 4: Build back of banquette bench framing.
- Step 5: Install interior and back framing.
- Step 6: Cut & install front piece to the framing.
- Step 7: Build and install plywood interior boxes for storage.
What is a banquette in a kitchen?
An upholstered banquette for two is tucked in between two floor-to-ceiling pantries for plenty of kitchen storage space. A space-saving half-round table provides surface area for dining or homework, and can be moved to accommodate the dining room, which is just a few steps away.
How much space is needed for a banquette?
If you are thinking about putting a banquette in your kitchen, heed Susan’s advice: Ideally, you need a minimum of 27 inches of space for each person to sit comfortably. The depth of the benches should be at least 24 inches, because you will want to leave space for an angled back or upholstered seating.
Does a banquette save space?
Not only does banquette seating take up less space, but also, unlike a typical chair, you can build storage into the space under the bench. In this kitchen from Domino, a built-in bench allows a dining area to fit into a very small space.
Is banquette seating comfortable?
For example, a banquette is visibly more comfortable and cozy than a regular chair. However, it’s also a different seating solution that doesn’t allow individual use. So the fact that it needs to be shared by several people might not make it so great after all in some cases.
What is banquette seating?
Banquette seating refers to the built-in benches often found in restaurant seating. While booths and banquettes have always been a cozy way to dine, they have now moved into the residential arena and are showing up in kitchens and family rooms everywhere.
What is the depth of a banquette seating?
Allow a minimum of 21 inches of table and seating width per person. Also allow 18 inches of seating depth, not counting the back support. For U-shape banquettes, allow 54 inches for each leg of the U and 78 inches for the rear bench.
How much does it cost to build a bench seat?
A more complex bench like a curved bench with larger seating space that is built directly into the deck can cost between $3000 and $6000 to build and $1120 to $2240 (two to four labor days) to install.
Photo in the article by “Wikimedia Commons”